Can it be extended later?
Yes. Same parts, additional bays.
Can it be colour-matched to our scheme?
Yes, to order, on a job of reasonable size. It affects lead time.
Do you have wind-load figures?
Published data for screening applications is in development. Talk to us with the specifics of your site and we’ll advise on spacing and fixing.
What about fire requirements on our project?
The aluminium is classified A2-s1, d0 to EN 13501-1. That’s the material classification, not a certification of the completed enclosure. Send us the project requirement and we’ll be straight with you about what our evidence covers.
Does it rattle?
Boards are held in channel rather than fixed loosely. If you’re screening something that vibrates, mention it at enquiry. It’s a setting-out consideration.
Is it secure?
Boards are held in channel with no visible fixings on the face, and the top cap locks the run down so panels can’t be lifted out. Access gates use the same stainless-steel lock as the gate range.
Can it go on a roof?
It’s been used at roof level. Wind loading governs at height, so this is one to discuss at design stage rather than order off the page.
Does it need a roof?
Not structurally. If a covered store is required, tell us at enquiry stage. It changes the frame.
Is it ventilated?
The face can be run solid for full screening or with even gaps for airflow. For enclosed bin stores, some airflow is usually worth having.
Can we get to the equipment for servicing?
Yes, a matched lockable gate in the same finish, so access doesn’t compromise the look.
